AJ65SBTB1-32D MITSUBISHI PLC

Performance specification

Input format : DC input (plus common / negative common shared type)

Number of inputs  32 points

Rated input voltage DC24V

Rated input current   About 7mA

Use voltage range  DC19.2 ~ 26.4V (ripple ratio within 5%)

Maximum simultaneous input points  Hundred percent

ON voltage / ON current  14V or more /3.5mA more

OFF voltage / OFF current  6V following /1.7mA below

Input resistance  About 3.3kΩ

Input response time

OFF → ON  1.5ms or less (DC24V)

ON → OFF1.5ms or less (DC24V)

Input common method  32 points per common (terminal block 1-wire)

Input Insulation method  Photo-coupler isolation

Dielectric strength voltage DC external terminals and ground between: AC500V 1 minute

Insulation resistance DC external terminals and ground between: DC500V and 10MΩ or more by insulation resistance tester

Protection grade IP2X

Station type  Remote I / O station

Number of occupied stations 1 station

Unit power

Voltage DC20.4 ~ 26.4V (ripple ratio within 5%)

Current45mA or less (DC24V, when all points ON)

External wiring connection methodCommunication unit, the unit power supply unit: 7-point 2-piece terminal block (M3 screws)

input and output power supply unit, input-output unit: 34 points directly attached terminal block (M3 screws)

External dimensions

Height (H)50mm

Width (W)179mm

Depth (D)40mm

mass0.25kg